Navigation:
   Main Page
    Local Churches
 
   For visitors:
   Rates
   Requirements
   Sign Up
   Policies
  
   System Information:
   Current Status
   
    
 © 1997 - 2004
Crosswind Internet Services, Inc.

How to Install Dial-Up Networking for
Windows 95 & 98

A. Check to see that Dial-Up Networking is installed

1. Double-Click on My Computer.

2. Look for the Dial up Networking folder.

3. If it is not there, go to step B.

4. If it is installed, then go to step C.

B. If Dial Up Networking is not installed

1. Click on Start.

2. Click on Settings.

3. Double-Click on Control Panel. 

4. Click on Add/Remove Programs.  
5. Click on the Windows Setup tab.

6. Double-Click on Communications.
7. Click in the box next to Dial-Up Networking.

8. Click on OK.

9. Click on Apply.

10. Windows will need your Windows 95 CD-ROM or floppy disks.
11. If asked for a Work Group, enter crosswind.net
12. If asked for a computer name, enter your username.

11. After the drivers are installed, it will ask you to restart the computer. Click on Yes.

C. Checking your Network Connections

1. Click on Start.

2. Click on Settings.

3. Double-Click on Control Panel.

4. Double-Click on Network.

5. Under Configuration, look for the Dial-Up Adapter.

6. If it is not there, go to D.

7, If it is there, go to E.

D. Installing the Dial-up Adapter

1. In the Network window, Click on Add.

2. Double-Click on Adapter.   
3. Scroll down and Click on Microsoft.   
4. Click on Dial-Up Adapter.

5. Click on Add again if necessary.

6. Click on Protocol.  
7. Scroll down and Click on Microsoft.

8. Click on TCP/IP.

9. Click Ok.

10. Windows will ask you for your Windows 95 CD or floppy disks.

11. Windows will then restart.

12. Go to F.

E. If The Dial-Up Adapter is there

1. Scroll down and make sure the TCP/IP protocol is installed.

2. If it is not there:

a. Click on Add

b. Double-Click on Protocol

c. Scroll down and Click on Microsoft

d. Click on TCP/IP.

e. Click on OK.

f. Windows will ask you for your Windows CD or floppy disks.

g. Windows will restart your computer.

F. Adding a Connection

1. Double-Click on My Computer.

2. Double-Click on the Dial-Up Networking folder.

3. Double-Click on Make New Connection.

4. Enter the name: Digital CROSSWIND.

5. Click on Next.

6. Enter 806 in the area code box.

7. Enter 546-0101 in the phone number box.
8. Click on next - Click on finish

G. Setting up the Connection

1. Double-Click on My computer.

2. Double-Click on Dial-Up Networking.

3. Right Click on Digital Crosswind icon.

4. Click on Properties.

5. Click on the General tab.

6. Click on Configure.

a. Click on General.

b. Look under Maximum Speed.

c. Scroll down and select your max baud rate.

d. Click on Options tab.

e. Make sure there is NOT a check in Bring Up Terminal Window After dialing.

f. Click on OK.

7. Click on Server Type tab.

a. Clear all checkmarks EXCEPT TCP/IP.

b. Make sure the Server Type is PPP.

c. Click on TCP/IP Settings button.

e. Enable Server assigned IP Address

i. Enable Server assigned Name and Server Addresses

j. Check "use IP header compression and check use default gateway on remote network

j. Click OK.

H. Connecting.

1. Click on My Computer.

2. Click on Dial-Up Networking.

3. Click on Digital Crosswind

5. Enter your username and password in the appropriate boxes.

6. Click on Connect.

7. You are now connected to Crosswind.

8. Run your favorite Web Browser (i.e. Netscape or MS Internet Explorer)!

 

INTERNET SETUP INFORMATION for dialer/winsock & web browsers:

DIALER/WINSOCK:

IP ADDRESS: 0.0.0.0 or Server Assigned

Name Server Primary (DNS): 63.87.216.2

Name Server Secondary (DNS): 63.87.216.3

Domain name: crosswind.net

Host Name: <Your Username>

 

WEB BROWSER:

Outgoing mail (SMTP) mail.crosswind.net

Incoming mail (POP3) server: mail.crosswind.net

News (NNTP) server: news.crosswind.net

 

If you are still experiencing difficulties, call 456-2435 or 1-888-855-8888 and ask for a callback to configure dial-up networking.